Magnesium Sulfate Hepta / Used for Leather, Explosives and Paper CAS 10034-99-8

• Customization: Available
• CAS No.: 10034-99-8
• Formula: Mgso4.7H2O
• Purity: ≥99%
• Type: Sodium Sulfate
• Appearance: Powder
• Grade Standard: Industrial Grade
• The Molecular Weight: 246.47
• Density: 1.68
• Melting Point: 1124
• pH: 7
• Trademark: LongHongchem
• Origin: Shandong
• HS Code: 29051220
• Production Capacity: 100, 000tons/Year

Product Description

WEIFANG LONGHONG CHEMICAL INC.
Room 709 Jinjiang Building Xinhua Road Weifang Shandong 261041 China
 
 
 
PRODUCT DATE SHEET
 
PRODUCT NAME: MAGNESIUM SULFATE HEPTAHYDRATE
CAS NO.:10034-99-8
Molecular Weight: 246.47
Chemical Formula: MgSO4.7H2O



1.Composition/Information on Ingredients
  Ingredient                   CAS No         Percent        Hazardous                                  
  ---------------------            ------------         ------------       --------- 
  Magnesium Sulfate Hpetahydrate 10034-99-8 98- 99.5% No

2.Hazards Identification
Emergency Overview 
-------------------------- 
CAUTION! MAY BE HARMFUL IF SWALLOWED. 

SAF-T-DATA^(tm) Ratings (Provided here for your convenience) 
------------------------------------------------------------------------------------------------- 
Health Rating: 1 - Slight 
Flammability Rating: 0 - None 
Reactivity Rating: 1 - Slight 
Contact Rating: 1 - Slight 
Lab Protective Equip: GOGGLES; LAB COAT; PROPER GLOVES 
Storage Color Code: Green (General Storage) 
---------------------------------------------------------------------------------------------------- 
Potential Health Effects 
---------------------------------- 
Inhalation: 
Dust may be slightly irritating. Sore throat or coughing may occur. 
Ingestion: 
Since magnesium salts are slowly absorbed, abdominal pain, vomiting and diarrhea may be the only symptoms. However, if elimination is blocked by bowel blockage or other reasons, CNS depression, lack of reflexes, hypocalcemia (deficiency of calcium in the blood) may occur. 
Skin Contact: 
No adverse effects expected but may cause minor skin irritation. 
Eye Contact: 
No adverse effects expected but dust may cause mechanical irritation. 
Chronic Exposure: 
No information found. 
Aggravation of Pre-existing Conditions: 
No information found. 

3.First Aid Measures
Inhalation: 
Remove to fresh air. Get medical attention for any breathing difficulty. 
Ingestion: 
Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice. 
Skin Contact: 
Remove any contaminated clothing. Wash skin with soap and water for at least 15 minutes. Get medical attention if irritation develops or persists. 
Eye Contact: 
Wash thoroughly with running water. Get medical advice if irritation develops. 
Note to Physician: 
IV administration of calcium gluconate will partially reverse the effects of acute magnesium toxicity. Ventricular support with calcium chloride infusion and mannitol forced diuresis has also been successful. 

4.Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. 

5.Exposure Controls/Personal Protection
Airborne Exposure Limits: 
None established. 
Ventilation System: 
A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details. 
Personal Respirators (NIOSH Approved): 
For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres. 
Skin Protection: 
Wear protective gloves and clean body-covering clothing. 
Eye Protection: 
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area. 

6.Physical and Chemical Properties
Appearance: 
Transparent crystals, or white powder. 
Odor: 
Odorless. 
Solubility: 
Very soluble in water. 
Density: 
2.65 g/ml @ 4C 
pH: 
Aqueous solution is neutral or slightly acid. 
% Volatiles by volume @ 21C (70F): 
No information found. 
Boiling Point: 
Not applicable. 
Melting Point: 
1124C (2055F) 
Vapor Density (Air=1): 
No information found. 
Vapor Pressure (mm Hg): 
No information found. 
Evaporation Rate (BuAc=1): 
No information found.



7.Stability and Reactivity
Stability: 
Stable under ordinary conditions of use and storage. 
Hazardous Decomposition Products: 
Oxides of sulfur and the contained metal. 
Hazardous Polymerization: 
Will not occur. 
Incompatibilities: 
Ethoxy ethyl alcohols, arsenates, phosphates, tartrates, lead, barium, strontium, and calcium 
Conditions to Avoid: 
Heat, moisture, incompatibles.